Le Protecteur 1732

Some new planking & rigging overhaul for this 10` model (smallest planking to date)

MV "Turbulant"

$15,000, click here to enquire...

35` converted troller, good engine, quality work completed but needs attention to hit the water. The starboard side has been rebuilt with approx 20 new ribs & approx. 12 new planks, The port side needs to be rebuil...

Sport boat

Aluminum modifications

FV "Adriatic"

New aluminum bulwarks

Sony Sue

New stern on this 38` halibut longliner which will include aluminum bulwarks

MV "SHIRLEY"

$49,500, click here to enquire...

40` Wahl troller built in 1967 at Dodge Cove in Prince Rupert. Extensively rebuilt in 1996 after accident. Very nice shape. Have survey & more pics

La dame Belle

$8500, click here to enquire...

23` McVay Bluenose daysailer, beautiful lines, lots of teak trim, with outboard and new road legal trailer. Ready to sail

Hildor II

36` Grand banks Misc repair to remove deterioration from decks,windows,planking

New Venture

Bow thruster install in large wooden ex-seiner

New Millenium

Bulbous bow installation

Pathfinder III

Small repair work completed on The Pathfinder III.

Savory Isle

The Savory Isle was a 42 foot Wahl Troller. Commodore's Crafted Boats has rebuilt and converted this vessel into a yacht. We have removed the deck in preparation for lengthening the wheel house for the yacht convers...

Pacific Provider

The Pacific Provider was a 42 foot Wahl Troller. Commodore's Crafted Boats rebuilt this vessel to restore it's natural beauty and functionality as a fishing boat.

Nalle

This boat was totally rebuilt. Among the work done, it was lengthened by 4 feet, had the main deck raised by one foot and received a bigger fish hold.

Majestic Warrior

The Majestic Warrior was a steel reinforced fiberglass vessel. All structural steel members, (keel, frames, deck beams, bulkheads, etc.) are completely encapsulated in fiberglass. The bulwarks and cabin are aluminum...

The Endeavour

The Endeavour was a major project taken on by Commodore's Crafted Boats. The Endeavour was on a competitors marine railway for routine maintenance when it fell over on its starboard side. The impact caused the fish ...

Talisman

27` sailboat totally restored & rebuilt from stem to stern

Heavily Built Seiner/Dragger

These 80 foot, heavily built seine boats, have recently had some upgrading: Remove and repair bowthruster and beaver tail new planking on bow with stopwaters under bowthruster keel splices reka...

Sun Corona

The Sun Corona was was built from traditional "Wahl" lines in the "Wahl" shipyard. Thirty-Five years after it was built, the Spillers rebuilt it using their modern methods. This boat follows the same lines as oth...

Viking King

This tug was built 85 years ago, and needed a total rebuild. It was reframed, an entire new top, including: New deck beams New Deck New Guards New Bulkwards New Bow Stem ...

The Maille III

The Maille III was one of Bo`s more interesting projects. His craftsmanship, design and problem solving were featured in Western Fish and Seafood Magazine. To get the full story about the Maille III and Bo's cr...

Egg Harbour

The egg Harbour was a total rebuild after 48 years in the water. One of the many jobs completed was the extention of the transom stern (swim grid).

Gypsy Blue II

The Gypsy Blue II (ex Desert Mariner) is a 48 foot chris craft. We installed a new mahogany stern, a teak deck & paint job. The finished product is a first prize candidate for any wooden boat show.

A New Millenium

A New Millenium was an aluminium vessel that was converted into a shrimp trawler. We lengthened the boat by 9 feet and installed rolling chalks. Here you can see the boat inside our main shop and being prepped for t...

Chris Craft

34 foot Classic Chris Craft needed refastening, new chines and repainting.

The Swell

The following work has been done to convert this 1912 built tug into a sports fishing passenger vessel: Some items included in the total restoration include - taken approximately 12 inches of hog out of keel - ...

M.V. Dorothy

This is a 33’ wooden motor vessel with quite a history. Totally rebuilt & restored for river & lake use in the Yukon Territory. It is carvel planked on oak frames using 1¼” – 1½” red cedar planking, galvanized faste...

Ella Mckenzie

The Ella Mckenzie is a good example of an old work boat/tug boat that is being restored for pleasure use. Built in 1942, and 36' long, this old boat is getting all new decking, planking, a new bow stem, guard planks...

Landing Craft

Prices start at $22,000 for bare hulls, click here to enquire...

The crafts's tough construction is great for rugged jobs and beach landings. Inquire with us today about pricing and availability for these practical 20' - 45' aluminium landing crafts.

Angeline Helene

Building solid teak wheelhouse on the 36' sailing ketch "Angeline Helene"

North Arm Highlander

Priced at $39000, click here to enquire...

1945 U.S. Navy Design Very heavily built with excellent materials. No expense was spared while being designed and built. Equiped with beautiful bronze hardware. Available for project to any stage of completion...

Cape Pine

The 110' ex-sub chaser, M.V. Cape Pine, was in for new sister frames and sistered deck beams along with guard planks and guards with new covering boards and some decking. The "Cape Pine" was built in the second w...

Silhouette II

Work Done: * Bow stem and horn timber replaced * Refastened The ship yard deduced that this boat was deteriorating due to a major electrolysis problem. The copper sheathing had caused electrolysis to ...